Gundam

Master Grade Gunpla Guide: Scale, Best Kits, and What to Buy

Updated · 9 sources

"MOBILE SUIT GUNDAM 40th Anniversary" Trailer Official video: GUNDAM CHANNEL INTL on YouTube

Master Grade (MG) is Bandai's 1/100 scale Gunpla model line featuring an internal mechanical skeleton and snap-fit color parts. Standing roughly 7 to 8 inches tall, MG kits balance posability and engineering without requiring paint or glue.

What is a Master Grade Gundam kit?

According to Gunpla reference sites, Bandai launched the Master Grade line in July 1995 to celebrate the 15th anniversary of the original Gundam anime series. The debut kit was the 1/100 RX-78-2 Gundam in 1995.

Unlike smaller lines, an MG kit centers on an internal mechanical frame. Builders assemble the skeleton first, then clip the colored armor parts over it.

Most kits include working hydraulic pistons, cockpit hatches that open, and seated 1/100 scale pilot figurines. Finished kits stand 18 to 23 centimeters tall, depending on the mobile suit design.

How MG compares to other Gunpla grades

Grade comparison

Grade | Scale | Key distinction

HG (High Grade) | 1/144 | Lower cost, hollow limbs, no full skeleton

RG (Real Grade) | 1/144 | High part count, tiny frame parts

MG (Master Grade) | 1/100 | Full inner skeleton and opening cockpits

FM / RE 1/100 | 1/100 | Outer detail at 1/100 without full inner frame

PG (Perfect Grade) | 1/60 | Metal parts, LED systems, highest price

Scale differences

Scale is the main dividing line. HG and RG models stand around 5 inches tall, while MG models stand 7 to 9 inches tall. Fans looking for 1/100 kits from The Witch from Mercury will notice Bandai opted for Full Mechanics kits instead of the MG line.

MG sub-lines: Ver.Ka, MGEX, and MGSD

Ver.Ka releases

According to model reference databases, the Version Katoki (Ver.Ka) line began in 2002 under mecha designer Hajime Katoki. These kits feature Katoki's distinct proportions, altered color palettes, and large sheets of water slide decals. Standouts include the MG Nu Gundam Ver.Ka (2012), MG Sazabi Ver.Ka (2013), and MG Zeta Gundam Ver.Ka (April 2023).

MGEX sub-line

Bandai introduced Master Grade Extreme in September 2020 with the Unicorn Gundam Ver.Ka, which bundled an integrated flexible LED light sheet. The second entry, the MGEX Strike Freedom Gundam (November 2022), used three shades of gold plating and copper etching sheets inside the frame.

MGSD sub-line

Launched in January 2023 with the Freedom Gundam, MGSD combines the super-deformed aesthetic with Master Grade engineering. These kits feature working pistons, clear camera parts, and full frame articulation inside a compact 115-millimeter body.

Best MG Gundam kits to build

MG ASW-G-08 Barbatos (2019)

The MG Barbatos uses a complete Gundam Frame with chrome-finished sliding pistons in the torso and legs. It omits soft polycap joints, giving the joints enough friction to hold its heavy mace overhead.

MG RX-78-2 Gundam The Origin (2015)

This kit adapts Yoshikazu Yasuhiko's manga design. It features an ankle and wrist range that outperforms earlier 2.0 and 3.0 versions, along with clear effect parts and two chest weapon options.

MG GN-002 Gundam Dynames (2019)

The Dynames uses Bandai's 00-generation inner frame. Its hip joints drop down for stable sniper poses on the ground, and the head camera fin slides to reveal the sniper lens.

MG RGM-89 Jegan (2018)

The Jegan provides a clean grunt suit build. Its frame snaps together quickly, nub placements remain out of view, and the kit avoids loose decorative parts.

Kits to avoid for your first MG build

Fragile transformations

Some builders note that early transformable kits like the MG Zeta Gundam 1.0 (1996) and MG Victory Gundam Ver.Ka (2009) have thin plastic hinges that crack under pressure. Transforming them between mobile suit and wave rider modes often stresses tiny joints.

Complex vinyl covers

Some hobbyists caution that the MG FA-78 Full Armor Gundam Ver.Ka (2016) requires builders to crinkle vinyl sleeves over the joint skeletons before attaching outer armor. If the sleeve pinches or tears during assembly, the joint can bind permanently.

Essential tools and average build times

Basic tool kit

  • Single-blade hobby nippers for clean gate cuts
  • Hobby knife (hobby blade #11) for trimming nubs
  • Sanding sponges (800 to 1200 grit)
  • Fine-tip panel line marker or pour-type liner
  • Tweezers for placing stickers and foil eyes

Time investment

Builders generally estimate that a standard MG kit with 300 to 450 parts takes roughly 8 to 12 hours of assembly time. A Ver.Ka kit with water slide decals and complex armor shifting mechanisms can take 18 to 25 hours. As Bandai Namco expands projects like the upcoming Gundam live-action movie, modern kits continue to refine sprue gates to shorten clean-up time.

FAQ

What does MG stand for in Gundam?

MG stands for Master Grade, a Bandai model kit brand launched in 1995 that uses a 1/100 scale and full internal skeletal frame.

Do MG Gunpla kits need glue or paint?

No, MG kits are engineered as snap-fit models molded in multiple plastic colors. You can build them completely using only a pair of hobby nippers.

Is MG harder to build than RG?

MG kits have larger parts than RG kits, making them easier to handle and less prone to dropping or breaking tiny pieces. However, MG kits take more time to finish due to their higher overall part volume.

How much do Master Grade kits cost?

Official Bandai list prices in Japan typically range from around 4,400 to 5,390 yen for standard MG kits like the Jegan and Barbatos, up to 9,900 yen for larger Ver.Ka releases like the Sazabi Ver.Ka.

Sources

Blogs & fan discussion

  1. youtube.com Japanese
  2. japan-figure.com Japanese
  3. Bandai Hobby Site - Master Grade Lineup Japanese
  4. gunplastory.com
  5. gumplaofmiami.com
  6. collectibles.wiki
  7. aztoyhobby.com
  8. Top 5 Master Grade Kits for Beginners in 2026 - Gunpla of Miami
  9. reddit.com

Statements backed only by blogs or fan discussion are written as what fans say, not as fact.